Leica TM30/TS30
Leica TM30 total station
The Leica TM30 is a robotic total station especially for deformation monitoring purposes. An additional Leica GeoCOM licence for the Leica TM30/TS30 is mandatory for the usage with OpenADMS.
| Leica TX30 | |
|---|---|
| Vendor: | Leica Geosystems AG, Switzerland |
| Type: | Total Station |
| Sensor File: | geocom.json |
| Interfaces: | RS-232, Bluetooth |
| Baud Rates: | 1200, 2400, 9600, 19200, 38400, 115200 |
| Serial Port Parameters: | 8N1 |
| Serial Port Mode: | active |
| Power Supply: | 12.8 VDC nominal (11.5 … 13.5 VDC actual) |
| Power Consumption: | 5.9 W (stand-by) |
| Sockets: | 1× LEMO EGI.1B.308.CLN (female jack) |
| Connectors: | 1× LEMO FGI.1B.308.CLLD (male plug) |
Female Jack
| Pin | Name | Description |
|---|---|---|
| 1 | USB_D+ | USB data |
| 2 | USB_D- | USB data |
| 3 | GND | ground |
| 4 | RxD | RS-232 |
| 5 | TxD | RS-232 |
| 6 | ID | identification pin |
| 7 | PWR | power supply |
| 8 | TRM_ON/USB_ID | RS-232, universal signal |
Female jack LEMO EGI.308.CLN